Constant-Temperature Incubation
Suitable for microbial, biochemical, cell and tissue, genetic, and general cultivation workflows requiring stable temperature conditions for laboratory incubation and observation.
Precision Constant-Temperature Incubator DB30 / DB45 / DB60 / DB120
Precision constant-temperature incubator for laboratory useA precision constant-temperature incubator helps maintain a controlled thermal environment for laboratory incubation and research workflows. Potential applications include microbiology, biochemical experiments, cell and tissue culture, genetics research, and other procedures that require a defined incubation temperature. Select a configuration according to the sample, protocol, required temperature, workload, and available installation space.Models in the DB seriesThe listed models are DB30, DB45, DB60, and DB120. The reference operating range provided for the series is ambient temperature +5°C to 70°C. Usable volume, internal dimensions, temperature uniformity, stability, and included accessories can vary by model or configuration. Confirm the technical data for the selected unit in writing before purchase.Listed modelItems to confirm before orderingDB30Usable volume, chamber dimensions, shelf arrangement, and electrical requirementsDB45Usable volume, chamber dimensions, shelf arrangement, and electrical requirementsDB60Usable volume, chamber dimensions, shelf arrangement, and electrical requirementsDB120Usable volume, chamber dimensions, shelf arrangement, and electrical requirementsTypical application considerationsIncubation and microbiological culture when the validated protocol is compatible with the unit.Biochemical testing that requires a stable, controlled temperature.Cell or tissue culture and genetics research when the required conditions match the equipment specification.Laboratory holding of samples only within the approved temperature and handling limits for the method.Selection checklistDefine the set point, incubation duration, acceptable temperature variation, and recovery expectations after door opening.Estimate sample load, container dimensions, shelf count, and clearance needed for airflow.Measure the installation footprint, door swing, room conditions, and available electrical supply.Discuss cleaning practices, sample type, door-opening frequency, and any monitoring or record-keeping needs.Request confirmation of the exact model, usable volume, chamber dimensions, performance data, and supplied accessories.Custom dimensions or configurations may be requested for review. Feasibility, lead time, and final specifications require supplier confirmation for each order.Frequently asked questionsWhat temperature range is listed?The reference range provided is ambient temperature +5°C to 70°C. Confirm the actual operating range for the selected model and the ambient conditions at the installation site.What capacity do DB30, DB45, DB60, and DB120 provide?The model names alone do not establish usable capacity. Please consult the current specification sheet or obtain written confirmation from the supplier rather than inferring volume from the model code.Can a custom size be requested?You may submit a request for review. Custom dimensions, build feasibility, delivery time, and final configuration are subject to technical review and quotation.See the low-temperature B.O.D. incubator for a different incubation application and temperature range.For model and configuration guidance, contact Fulcrum Technology with your application, temperature requirement, sample load, installation space, and electrical requirements.
Precision Constant-Temperature Incubator
The precision constant-temperature incubator is suitable for microbial cultivation, biochemical experiments, cell and tissue culture, genetic studies, and general laboratory incubation. Before selecting a model, confirm the required temperature range, chamber capacity, sample quantity, container dimensions, shelf requirements, and incubation time; then compare DB30, DB45, DB60, and DB120.
Fulcrum Technology can help assess constant-temperature incubators for laboratories, R&D units, schools, quality-control work, and testing workflows based on product information and your application. Confirm actual specifications, stock, lead time, custom dimensions, and repair services for the selected model and requirements.
Precision Incubator Constant-Temperature Incubator Microbial Cultivation Biochemical Experiments Cell and Tissue Culture
Temperature Control Above Ambient
The temperature range is ambient +5°C to 70°C, suitable for constant-temperature incubation above ambient, biochemical experiments, and laboratory sample observation.
Viewing Door and Temperature Control
An inner viewing door helps reduce temperature loss while observing samples. The unit features a full-touch panel, a microcomputer PID temperature controller with dual-line display, and SSR control.
Model Options by Capacity
The DB series includes DB30, DB45, DB60, and DB120 models with capacities of 30 L, 72 L, 150 L, and 420 L, respectively. Select a model based on sample quantity, container dimensions, and available laboratory space.
Specifications
| Model | DB30 | DB45 | DB60 | DB120 |
|---|---|---|---|---|
| Temperature Range | Ambient +5°C to 70°C | |||
| Temperature Controller | Full-touch panel, microcomputer PID temperature controller with dual-line display, SSR control | |||
| Temperature Accuracy | ±0.1°C | |||
| Viewing Door | Inner viewing door helps reduce temperature loss | |||
| Temperature Sensor | PT100Ω platinum temperature probe | |||
| Materials | Stainless-steel interior and powder-coated galvanized-steel exterior | |||
| Air Circulation | Gentle air circulation inside the chamber | |||
| Heater | Imported heater | |||
| Safety Protection | Power protection switch and independent over-temperature protector | |||
| Interior Dimensions W × D × H | 340 × 300 × 300 mm | 450 × 400 × 400 mm | 600 × 500 × 500 mm | 700 × 500 × 1200 mm |
| Exterior Dimensions W × D × H | 450 × 450 × 700 mm | 560 × 550 × 740 mm | 730 × 650 × 970 mm | 810 × 720 × 1750 mm |
| Capacity | 30L | 72L | 150L | 420L |
| Heater | 180W | 250W | 400W | 1200W |
| Power Supply | 110V | 110V | 110V | 110V / 220V |
| Accessories | 2 movable shelves | 2 movable shelves | 2 movable shelves | 5 movable shelves |
Custom dimensions, from small to large, may be available. For special capacity, chamber dimensions, or incubation requirements, provide the operating temperature, sample dimensions, capacity, and use case for confirmation.
Specifications are compiled from the supplied information. Confirm actual specifications, custom dimensions, included accessories, controller version, and supplied configuration with the manufacturer or Fulcrum Technology.
Model Selection
When selecting a precision constant-temperature incubator, confirm the incubation temperature, sample quantity, container dimensions, chamber capacity, shelf requirements, incubation time, and operating environment. For custom dimensions, provide the target chamber dimensions, sample conditions, and workflow for confirmation.
Frequently Asked Questions
Q: What are the main uses of a precision constant-temperature incubator?
A:Precision constant-temperature incubators are used for microbial cultivation, biochemical experiments, cell and tissue culture, genetic studies, and general laboratory incubation.
Q: How should I choose between DB30, DB45, DB60, and DB120?
A:Choose based on capacity, interior dimensions, sample quantity, and shelf requirements. DB30 has a capacity of 30 L, DB45 72 L, DB60 150 L, and DB120 420 L.
Q: What is the difference between a precision and a low-temperature incubator?
A:The precision incubator operates at ambient +5°C to 70°C for incubation above ambient. Low-temperature / B.O.D. incubators are intended for low-temperature incubation and BOD testing.
Q: Can custom dimensions be ordered?
A:Custom dimensions, from small to large, may be available for this series. Confirm manufacturable dimensions, specifications, and lead time based on sample conditions, chamber dimensions, and the intended use.
Q: Can Fulcrum Technology confirm stock, lead time, and repair services?
A:Fulcrum Technology can help confirm stock, lead time, after-sales technical support, and repair services based on the model and your needs. Actual service availability depends on model, operating condition, and requirements.
Need help confirming precision incubator specifications and model selection?
Provide the operating temperature, sample dimensions, capacity, incubation conditions, and whether custom dimensions are required. Fulcrum Technology can help assess a suitable model and availability.
Related Products
Low-Temperature B.O.D. Incubator DBL-45 / DBL-150 / DBL-420
DBL Series Low-Temperature B.O.D. Incubator
The DBL Series low-temperature incubator is designed for B.O.D. testing and controlled laboratory cultivation. The available product information lists DBL-45, DBL-150 and DBL-420 models and a temperature range of -10°C to 60°C. It may support biochemical experiments, cell and tissue culture, genetics research and other applications that require a stable, low-temperature chamber. Confirm the exact model configuration, chamber volume and operating conditions before ordering.
Applications
Use a B.O.D. incubator when a laboratory protocol requires temperature-controlled incubation below or around ambient conditions. Typical workflows include B.O.D.-related testing, biochemical work, cultivation of cells or tissues, genetic studies and general laboratory incubation. Suitability depends on the sample, protocol, set point, loading pattern and required temperature stability; validate these conditions with the equipment supplier before starting a regulated or critical test.
- B.O.D. testing and related laboratory workflows
- Biochemical experiments and sample incubation
- Cell and tissue culture where the protocol calls for controlled low-temperature conditions
- Genetics research and general laboratory cultivation
Model selection
Compare DBL-45, DBL-150 and DBL-420 by the chamber capacity and internal dimensions specified for the offered configuration. Match the chamber to the largest sample, number of containers, shelf arrangement and clearance needed for air circulation. Also confirm the intended temperature range, recovery expectations after door opening, monitoring requirements and available laboratory space. Model numbers alone do not confirm a usable volume or performance specification.
Product information to confirm
| Item | Available information / selection note |
|---|---|
| Product type | Low-temperature incubator / B.O.D. incubator |
| Models listed | DBL-45, DBL-150, DBL-420 |
| Temperature range in supplied product information | -10°C to 60°C; confirm the range for the selected model and configuration |
| Applications | B.O.D. testing, biochemical work, cell and tissue culture, genetics and general laboratory cultivation |
| Chamber volume, dimensions, shelves and electrical requirements | Confirm against the current manufacturer specification and quotation |
| Control, alarm and monitoring functions | Confirm available functions and options for the supplied version |
Product details should be checked against the latest manufacturer documentation. The model name, accessories, controller, electrical supply and available options may vary by configuration or production version.
Planning checklist
- Define the protocol temperature, allowable variation, incubation duration and whether samples must remain below ambient temperature.
- Measure sample containers and determine the number of samples, shelf positions and clearance needed around each load.
- Choose a chamber size that accommodates the working load while allowing circulation; do not select by model number alone.
- Confirm room conditions, installation footprint, door access, power supply and any monitoring or alarm requirements.
- Ask the supplier to confirm model-specific specifications, accessories, delivery, warranty and service coverage before purchase.
Frequently asked questions
What is a B.O.D. incubator used for?
It provides a controlled-temperature chamber for B.O.D.-related tests and laboratory incubation. The exact suitability depends on the method and required set point; confirm compatibility with the protocol.
What is the listed temperature range?
The supplied product information lists -10°C to 60°C. Verify the operating range, uniformity and control performance for the exact model and configuration.
How do I choose DBL-45, DBL-150 or DBL-420?
Compare confirmed chamber volume and internal dimensions with sample size, quantity, shelf arrangement and required air circulation. Ask for the current model specification before deciding.
Can it be used for cell or tissue culture?
Cell and tissue culture are listed among the product applications. Confirm that the model, temperature conditions and any required contamination-control or monitoring practices meet your laboratory protocol.
What should I confirm before ordering?
Confirm the exact model, temperature performance, usable chamber volume, dimensions, electrical supply, included accessories, controller options, delivery and after-sales service.
Need help selecting a model?
Share your protocol temperature, sample dimensions, quantity, required chamber capacity, available space and power conditions. Contact Fulcrum Technology for model and specification confirmation.