NR110 Economical Colorimeter (Single 6 mm Aperture)
NR110 Economical Colorimeter | Handheld Design for Fast Color Comparison and Routine QC
The NR110 economical colorimeter is a handheld instrument for quick on-site color comparison, incoming inspection, in-process checks, and routine quality control. It helps compare color differences between standards and samples so QC teams can obtain color-difference results efficiently.
NR110 includes illumination positioning and a crosshair alignment function to help operators target measurement locations. With a rechargeable lithium battery and CQCS3 quality management software, it can be considered for on-site inspections, portable measurements, and basic color-data management. Confirm suitability for the sample material, surface condition, measurement area, color uniformity, and QC workflow before implementation.
NR110 Colorimeter Features
Designed for QC tasks that require portability, fast measurement, on-site comparison, and basic color-difference management.
Illumination and Crosshair Positioning
Illumination positioning and a crosshair help operators target the measurement area, supporting QC workflows that require fixed measuring points, repeat measurements, and quick on-site decisions.
Flexible Aperture Selection
Select the measurement aperture according to sample area and surface condition. A larger area can help provide a more stable average result; for small samples, carefully confirm the sampling location and surface condition.
New Integrating-Sphere Optical Design
The integrating-sphere optical design helps reduce the influence of stray light and supports stable routine color comparison. Actual performance depends on sample conditions and operating procedures.
Φ6 mm Measurement Aperture
The Φ6 mm aperture and upright design suit a range of materials and routine QC applications. For small, uneven, or nonuniform samples, confirm the sampling method and averaging settings.
Rechargeable Lithium Battery
The high-capacity rechargeable lithium battery supports on-site inspections, portable measurements, and production-line sampling while reducing the need to replace disposable batteries.
CQCS3 Quality Management Software
Pair with CQCS3 quality management software to review data, analyze color differences, and maintain QC records. Available functions depend on the software version, computer environment, and intended use.
Confirm Documentation and Certification Requirements
If your purchasing process requires certifications, test documents, or manufacturer materials, specify these needs before requesting a quotation. Fulcrum Technology can help confirm availability for the applicable product version and supplied documentation.
Compact Handheld Design
Its lightweight handheld form is convenient for quick measurements in laboratories, production lines, warehouses, supplier acceptance checks, and customer sites.
NR110 Application Scenarios
Incoming Inspection
Quickly compare raw materials, components, packaging, and samples against a standard.
In-Process Inspection
Suitable for production-line sampling, batch-difference checks, and tracking color changes during processing.
Pre-Shipment Inspection
Check product color differences against a standard before shipment and support basic QC records.
Quick On-Site Assessment
Useful for QC, purchasing, and acceptance workflows that need a portable instrument for preliminary color-difference checks.
Selection and Use Guidance
NR110 is suited to quick color comparison and routine QC. For glossy, rough, nonuniform, transparent, or translucent samples, first confirm the aperture, sampling location, averaging method, and internal acceptance criteria. If you need full spectral data, multi-illuminant analysis, SCI/SCE switching, or supply-chain color traceability, consider a handheld spectrophotometer.
Contact Fulcrum Technology to discuss NR110 selectionNR110 Economical Colorimeter Specifications
The specifications below support NR110 selection, purchasing, and routine QC implementation planning. NR110 uses D/8 measurement geometry and a Φ6 mm aperture for quick color comparison, incoming inspection, in-process checks, and on-site QC. Confirm suitability for the sample material, surface condition, measurement area, color uniformity, and QC workflow before implementation.
| Product Model | NR110 Colorimeter |
|---|---|
| Measurement Geometry | D/8 (diffuse illumination, 8° directional viewing, including specular component SCI); complies with CIE No. 15 and GB/T 3978. |
| Detector | Silicon photodiode array |
| Spectral Method | Not applicable |
| Integrating Sphere Diameter | Φ40mm |
| Illumination Source | Full-spectrum LED source |
| Wavelength Range | Not applicable |
| Illuminant | D65 |
| Wavelength Interval | Not applicable |
| Reflectance Range | Not applicable |
| Measurement Aperture | Φ6mm |
| Specular Component | SCI |
| Color Space | CIE L*a*b*, XYZ, and L*C*h |
| Color Difference Formula | ΔE*ab |
| Other Colorimetric Indices | Not applicable |
| Observer Angle | 10° |
| Displayed Parameters | Sample colorimetric values, color difference, pass/fail result, and color bias |
| Measurement Time | Approx. 1.5 s |
| Repeatability | ΔE*ab ≤ 0.08 (after warm-up and calibration; average of 30 white-tile measurements at 5-second intervals) |
| Inter-Instrument Agreement | ΔE*ab ≤ 0.4 (average measured across 12 BCRA Series II color tiles) |
| Measurement Mode | Single measurement |
| Positioning | Alignment positioning |
| Dimensions | 205 × 67 × 80mm |
| Weight | Approx. 400 g |
| Power Supply | Rechargeable lithium battery |
| Light Source Life | Approx. 5 years; more than 1.6 million measurements |
| Display | 2.8-inch TFT color display |
| Connectivity | USB |
| Data Storage | 100 standards and 20,000 samples |
| Software | CQCS3 quality management software |
| Languages | Traditional Chinese, Simplified Chinese, and English |
| Operating Conditions | 0–40°C; 0–85% relative humidity, non-condensing |
| Storage Conditions | -20–50°C, non-condensing |
| Standard Accessories | Power adapter, user manual, wrist strap, white tile, cable, quality management software (download from the official website), Φ6 flat aperture, and Φ6 conical aperture |
| Optional Accessories | Mini printer and powder test box |
| Note | Specifications may change. Please confirm with Fulcrum Technology or refer to the latest manufacturer documentation. |
Selection note: NR110 is suited to quick color comparison, incoming inspection, in-process checks, and routine QC. For glossy, rough, nonuniform, transparent, or translucent samples, confirm the aperture, sampling location, sample fixturing, averaging method, and internal acceptance criteria. If you need full spectral data, multi-illuminant analysis, SCI/SCE switching, or supply-chain color traceability, consider a spectrophotometer.