BOD Testing and Culture Applications
For BOD testing, biochemical work, cell and tissue culture, genetics, and other applications that require low or stable temperatures.
Low-Temperature B.O.D. Incubator DBL-45 / DBL-150 / DBL-420
DBL Series Low-Temperature B.O.D. IncubatorThe DBL Series low-temperature incubator is designed for B.O.D. testing and controlled laboratory cultivation. The available product information lists DBL-45, DBL-150 and DBL-420 models and a temperature range of -10°C to 60°C. It may support biochemical experiments, cell and tissue culture, genetics research and other applications that require a stable, low-temperature chamber. Confirm the exact model configuration, chamber volume and operating conditions before ordering.ApplicationsUse a B.O.D. incubator when a laboratory protocol requires temperature-controlled incubation below or around ambient conditions. Typical workflows include B.O.D.-related testing, biochemical work, cultivation of cells or tissues, genetic studies and general laboratory incubation. Suitability depends on the sample, protocol, set point, loading pattern and required temperature stability; validate these conditions with the equipment supplier before starting a regulated or critical test.B.O.D. testing and related laboratory workflowsBiochemical experiments and sample incubationCell and tissue culture where the protocol calls for controlled low-temperature conditionsGenetics research and general laboratory cultivationModel selectionCompare DBL-45, DBL-150 and DBL-420 by the chamber capacity and internal dimensions specified for the offered configuration. Match the chamber to the largest sample, number of containers, shelf arrangement and clearance needed for air circulation. Also confirm the intended temperature range, recovery expectations after door opening, monitoring requirements and available laboratory space. Model numbers alone do not confirm a usable volume or performance specification.Product information to confirmItemAvailable information / selection noteProduct typeLow-temperature incubator / B.O.D. incubatorModels listedDBL-45, DBL-150, DBL-420Temperature range in supplied product information-10°C to 60°C; confirm the range for the selected model and configurationApplicationsB.O.D. testing, biochemical work, cell and tissue culture, genetics and general laboratory cultivationChamber volume, dimensions, shelves and electrical requirementsConfirm against the current manufacturer specification and quotationControl, alarm and monitoring functionsConfirm available functions and options for the supplied versionProduct details should be checked against the latest manufacturer documentation. The model name, accessories, controller, electrical supply and available options may vary by configuration or production version.Planning checklistDefine the protocol temperature, allowable variation, incubation duration and whether samples must remain below ambient temperature.Measure sample containers and determine the number of samples, shelf positions and clearance needed around each load.Choose a chamber size that accommodates the working load while allowing circulation; do not select by model number alone.Confirm room conditions, installation footprint, door access, power supply and any monitoring or alarm requirements.Ask the supplier to confirm model-specific specifications, accessories, delivery, warranty and service coverage before purchase.Frequently asked questionsWhat is a B.O.D. incubator used for?It provides a controlled-temperature chamber for B.O.D.-related tests and laboratory incubation. The exact suitability depends on the method and required set point; confirm compatibility with the protocol.What is the listed temperature range?The supplied product information lists -10°C to 60°C. Verify the operating range, uniformity and control performance for the exact model and configuration.How do I choose DBL-45, DBL-150 or DBL-420?Compare confirmed chamber volume and internal dimensions with sample size, quantity, shelf arrangement and required air circulation. Ask for the current model specification before deciding.Can it be used for cell or tissue culture?Cell and tissue culture are listed among the product applications. Confirm that the model, temperature conditions and any required contamination-control or monitoring practices meet your laboratory protocol.What should I confirm before ordering?Confirm the exact model, temperature performance, usable chamber volume, dimensions, electrical supply, included accessories, controller options, delivery and after-sales service.Need help selecting a model?Share your protocol temperature, sample dimensions, quantity, required chamber capacity, available space and power conditions. Contact Fulcrum Technology for model and specification confirmation.
Low-Temperature Constant-Temperature Incubator / B.O.D. Incubator
The low-temperature constant-temperature incubator / B.O.D. incubator is suitable for laboratory applications such as BOD testing, biochemical work, cell and tissue culture, genetics, and general cultivation. When selecting a model, first confirm the required temperature range, capacity, interior dimensions, sample quantity, culture conditions, and whether long-term stable operation is needed; then compare models such as DBL-45, DBL-60, and DBL-120.
Fulcrum Technology can help assess low-temperature incubation equipment for laboratories, R&D units, schools, quality-control work, and testing workflows based on product information and your application. Please confirm specifications, stock, lead time, and repair services for the specific model and requirements.
Low-Temperature Incubator B.O.D. Incubator BOD Testing Biochemical Laboratory Cell and Tissue Culture
Select by Capacity
The DBL series includes DBL-45, DBL-60, and DBL-120 models with capacities of 72 L, 150 L, and 420 L, respectively. Select a model based on sample quantity, container size, shelf requirements, and available laboratory space.
Low-Temperature and Constant-Temperature Control
The low-temperature incubator operates from -10°C to 60°C. A 0°C to 60°C range is available for the B.O.D. incubator to accommodate different culture and storage conditions.
Designed for Laboratory Use
The unit features a stainless-steel interior, powder-coated galvanized-steel exterior, PU foam insulation, gentle-air circulation, and protective devices for laboratory and quality-control workflows.
Specifications
| Model | DBL-45 | DBL-60 | DBL-120 |
|---|---|---|---|
| Applications | BOD testing, biochemical work, cell and tissue culture, genetics, and cultivation | ||
| Temperature Range | -10°C to 60°C; 0°C to 60°C is available for the B.O.D. incubator | ||
| Temperature Controller | Full touch panel, imported microcomputer PID auto-tuning temperature controller, and SSR control | ||
| Temperature Accuracy | ±0.1°C | ||
| Temperature Display | LED digital display, 0.1°C resolution | ||
| Temperature Sensor | PT100Ω platinum temperature probe | ||
| Materials | Stainless-steel interior and powder-coated galvanized-steel exterior | ||
| Air Circulation | Gentle-air circulation for even temperature distribution inside the chamber | ||
| Safety Protection | Power protection switch and over-temperature protector | ||
| Cooling System | Imported fully enclosed refrigeration compressor with quiet operation | ||
| Insulation | PU foam insulation for effective temperature retention | ||
| Capacity | 72 L | 150 L | 420 L |
| Interior Dimensions W × D × H | 450 × 400 × 400 mm | 600 × 500 × 500 mm | 700 × 500 × 1200 mm |
| Exterior Dimensions W × D × H | 560 × 550 × 880 mm | 710 × 650 × 1030 mm | 810 × 720 × 1720 mm |
| Heater | 450 W | 800 W | 1600 W |
| Compressor | 1/4 HP | 1/3 HP | 1/2 HP |
| Power Supply | 110 / 220 V，8 A / 4 A | 110 / 220 V，12 A / 6 A | 110 / 220 V，18 A / 9 A |
| Accessories | 2 movable shelves | 2 movable shelves | 5 movable shelves |
Other configurations, including -10°C, below -40°C, or ultra-low-temperature incubators, may be available from the manufacturer. For special low-temperature requirements, provide the operating temperature, capacity, and sample conditions for confirmation.
Specifications are compiled from manufacturer and product information. Confirm the actual specifications, included accessories, controller version, and supplied configuration with Fulcrum Technology.
Model Selection
When selecting a low-temperature constant-temperature or B.O.D. incubator, confirm the operating temperature, sample quantity, container dimensions, capacity, shelf requirements, culture duration, and whether it will be used for BOD testing. If the sample, culture, or quality-control workflow has special requirements, provide the application details for confirmation.
Frequently Asked Questions
Q: What are the main uses of a low-temperature incubator?
A:Low-temperature incubators are used for culture and storage processes requiring low or stable temperatures, including BOD testing, biochemical work, cell and tissue culture, genetics, and general cultivation.
Q: How should I choose between DBL-45, DBL-60, and DBL-120?
A:Choose based on capacity, interior dimensions, sample quantity, and shelf requirements. DBL-45 has a 72 L capacity, DBL-60 has 150 L, and DBL-120 has 420 L.
Q: What is the difference between a B.O.D. incubator and a low-temperature incubator?
A:A B.O.D. incubator is generally used to control culture conditions for BOD testing. A low-temperature constant-temperature incubator can be used for low-temperature culture, biochemical experiments, or sample storage, depending on the application. Confirm the model based on the test objective.
Q: Are incubators below -40°C or ultra-low-temperature models available for evaluation?
A:The manufacturer may offer configurations at -10°C, below -40°C, or ultra-low-temperature incubators. For special low-temperature requirements, provide the operating temperature, capacity, and sample conditions for confirmation.
Q: Can Fulcrum Technology confirm stock, lead time, and repair services?
A:Fulcrum Technology can help confirm stock, lead time, after-sales technical support, and repair services based on the model and your needs. Actual service availability depends on the model, operating condition, and requirements.
Need help confirming incubator specifications and model selection?
Provide the operating temperature, sample dimensions, capacity, culture conditions, and whether the unit is for BOD testing. Fulcrum Technology can help assess a suitable model and availability.
Related Products
Precision Constant-Temperature Incubator DB30 / DB45 / DB60 / DB120
Precision constant-temperature incubator for laboratory use
A precision constant-temperature incubator helps maintain a controlled thermal environment for laboratory incubation and research workflows. Potential applications include microbiology, biochemical experiments, cell and tissue culture, genetics research, and other procedures that require a defined incubation temperature. Select a configuration according to the sample, protocol, required temperature, workload, and available installation space.
Models in the DB series
The listed models are DB30, DB45, DB60, and DB120. The reference operating range provided for the series is ambient temperature +5°C to 70°C. Usable volume, internal dimensions, temperature uniformity, stability, and included accessories can vary by model or configuration. Confirm the technical data for the selected unit in writing before purchase.
| Listed model | Items to confirm before ordering |
|---|---|
| DB30 | Usable volume, chamber dimensions, shelf arrangement, and electrical requirements |
| DB45 | Usable volume, chamber dimensions, shelf arrangement, and electrical requirements |
| DB60 | Usable volume, chamber dimensions, shelf arrangement, and electrical requirements |
| DB120 | Usable volume, chamber dimensions, shelf arrangement, and electrical requirements |
Typical application considerations
- Incubation and microbiological culture when the validated protocol is compatible with the unit.
- Biochemical testing that requires a stable, controlled temperature.
- Cell or tissue culture and genetics research when the required conditions match the equipment specification.
- Laboratory holding of samples only within the approved temperature and handling limits for the method.
Selection checklist
- Define the set point, incubation duration, acceptable temperature variation, and recovery expectations after door opening.
- Estimate sample load, container dimensions, shelf count, and clearance needed for airflow.
- Measure the installation footprint, door swing, room conditions, and available electrical supply.
- Discuss cleaning practices, sample type, door-opening frequency, and any monitoring or record-keeping needs.
- Request confirmation of the exact model, usable volume, chamber dimensions, performance data, and supplied accessories.
Custom dimensions or configurations may be requested for review. Feasibility, lead time, and final specifications require supplier confirmation for each order.
Frequently asked questions
What temperature range is listed?
The reference range provided is ambient temperature +5°C to 70°C. Confirm the actual operating range for the selected model and the ambient conditions at the installation site.
What capacity do DB30, DB45, DB60, and DB120 provide?
The model names alone do not establish usable capacity. Please consult the current specification sheet or obtain written confirmation from the supplier rather than inferring volume from the model code.
Can a custom size be requested?
You may submit a request for review. Custom dimensions, build feasibility, delivery time, and final configuration are subject to technical review and quotation.
See the low-temperature B.O.D. incubator for a different incubation application and temperature range.
For model and configuration guidance, contact Fulcrum Technology with your application, temperature requirement, sample load, installation space, and electrical requirements.