Entry-Level Manual Four-Point Probe Measurement System (190 × 190 mm)
AiT CMT-100S is an entry-level manual four-point probe measurement system distributed by Zhidian. It uses a Signatone probe to accurately measure surface resistance (ohm/sq) and volume resistivity (ohm·cm). The integrated controller and measurement stage save space, while the internal modular slot design simplifies maintenance. This standard four-point probe system offers high accuracy, stability, and excellent value.
CMT-100S Four-Point Probe System Specifications
The CMT-100S is an entry-level manual four-point probe system for measuring surface resistance and volume resistivity. It uses a Signatone probe and an integrated controller and measurement stage. Check sample dimensions, surface condition, probe contact, and test objectives when selecting a configuration.
| Specification | CMT-100S |
|---|---|
| Measurement range | 1 mΩ/sq–2 MΩ/sq |
| Operating method | Manually lower the lever to contact a single point at the center of the sample, then take the reading. This is a manual single-point system. |
| Signatone four-point probe | Uses a Signatone probe with a quick-connect fitting/converter; no special tools or alignment equipment are required for installation. |
| Measurement display | Measurement data is displayed on the main unit's control panel. |
| Measurement speed | Approx. 2 ± 1 seconds per point |
| Internal component accuracy | ±0.5% (high-precision resistor) |
| Maintenance and service | Microprocessor-based design; electronic components are installed on replaceable printed circuit boards. |
| Software data download | USB interface with data storage and readback (Windows version). |
Specifications are for reference. Actual results depend on sample dimensions and condition, probe contact, measurement environment, and quality-control procedures.